Water-resistant polymer-modified grout with extra silicone, high abrasion and chemical resistance, low water absorption, delivering durable, vibrant joints.
1
DESCRIPTION
Waterproofing properties, High abrasion resistance, reduce water absorption,
polymer modifed and extra silicon added, frost resistant and water repellent.
PROPERTIES
• High resistance to acid and alkaline cleaners
• Highly wear-resistant
• High mechanical resistance
• Easy to apply
• Brilliant grout colours
APPLICATION
Stir Ultradur into cold, clean water until it is completely free of lumps. Use a
suitable tool, e.g. a helical mixer attached to an electric drill. Stir at a speed of
approx. 600 rpm until a uniform, homogeneous colour is achieved. Stir again
after a maturing time of 3 minutes. Apply the joint filler with a grouting board
(fine/cellular rubber) using the slurry technique. After start of setting, use little
water to wipe over and clean the freshly grouted covering with a damp sponge/
sponge board. Only clean the joint with clean, clear water without using any
additive. Later use a clean, dry cloth to remove any dry residual film on the tiles.
The tile covering is ready for foot traffic after 12 hours at the earliest.
PACKING
5 kg Bags
